Параметры

Материал корпуса
ABS пластик, закаленное стекло (TG) by abbreviation, but source says 'ABS TG', so value: 'ABS'? Wait: I'll re-read instruction: value must come from source. Source says 'ABS TG PWM BLACK'. So for material, I can take 'ABS' as is, and for side panel 'TG' as is. But I need to decide: should I combine? Better to separate. In this first attribute I'll put 'Материал' with value 'ABS' (main material), and then another attribute for side panel. However, 'ABS' is not 'ABS пластик', that is interpretation. I must keep original. So 'value': 'ABS' is fine. But then I need to indicate that TG is tempered glass. I'll separate as follows: 'Материал корпуса' with value 'ABS', and 'Тип боковой панели' with value 'TG (закаленное стекло)'. To avoid interpretation, I'll keep value as 'TG' but note the common meaning. Confidence for TG as tempered glass is high because standard notation. So I'll use 'TG' as value. Similarly for PWM, I'll keep 'PWM' as value. For color, 'BLACK'. The instruction says we may tidy spacing/casing, but never translate. So 'BLACK' can stay as is. But Russian catalog often writes 'Black' or 'черный', but we keep source. I'll keep 'BLACK'. However, the raw line has 'BLACK' in English. That's fine. I'll output as 'BLACK'. Confidence 0.98. Also, I should note that 'ABS' and 'TG' are separate specs. I'll create attributes: 'Материал корпуса','Боковая панель','Цвет','Поддержка PWM'. For 'Поддержка PWM', value 'Да' would be interpretation; better to put 'PWM' as value, but that's the abbreviation. I'll use 'PWM'. Confidence 0.85 because it's not explicitly described as a feature, but likely. Alternatively, I could call it 'Тип вентилятора' but it's not a type, it's a control. I'll go with 'Поддержка PWM' and value 'PWM'. Also, note that the product line includes 'PROART PA401' which is the model, but we are to skip model name. So no attribute for that. I'll also consider if there is any other spec: 'Корпус для ПК' is category. So specs are only those extracted from the string after the model. That's it. Let's write JSON. I'll include all four attributes with appropriate sortOrder. Since 'Материал корпуса' and 'Боковая панель' are more important, then color, then PWM. SortOrder: 10,20,30,40. Confidence: for 'ABS' explicit 0.95, for 'TG' explicit 0.95, for 'BLACK' explicit 0.98, for PWM 0.8 (since it's part of the string but its meaning is inferred). But I'll set confidence 0.85 for PWM. Also, note that the source has spaces: 'ABS TG PWM BLACK' – these are separate tokens. I'll keep them as separate attributes. That seems correct. I'll output JSON with these four attributes. But wait, I need to ensure that 'value' is exactly from source? For 'Боковая панель', value 'TG' – that is from source, but TG is abbreviation for tempered glass. It's acceptable to use 'TG' as value. The instruction says 'keep original units and notation'. So fine. For 'Цвет', value 'BLACK' – original. For 'Поддержка PWM', value 'PWM' – original. For 'Материал корпуса', value 'ABS' – original. However, I could combine them into one attribute 'Комплектация' but that would merge. Better to split. I'll go with split. Also, consider that the product line might imply a form factor, but not explicitly, so omit. So final JSON. I'll now write it. I need to be careful with JSON escaping. There are no special characters in values. So it's fine. I'll output as per example: single object with attributes array. No markdown fences. Let's produce{

ASUS PROART PA401 ABS TG PWM BLACK

Корпус ASUS PROART PA401 ABS TG PWM BLACK с алюминиевой отделкой и стеклянной боковой панелью предназначен для профессиональных рабочих станций.

Корпус ASUS PROART PA401 разработан для профессиональных рабочих станций и высокопроизводительных сборок. Сочетает строгий дизайн с отличной воздухопроницаемостью и поддержкой современных компонентов.

• Алюминиевая передняя панель с перфорацией для эффективного воздухообмена.

• Закаленное стекло на боковой стенке для демонстрации внутренних компонентов.

• Поддержка материнских плат ATX и системы охлаждения с ШИМ-управлением.

Внутреннее пространство позволяет устанавливать длинные видеокарты, крупные кулеры и блоки питания. Фильтры пыли упрощают обслуживание. Корпус подходит для производительного ПК для работы, творчества и профессиональных задач.

Корпуса для ПК ASUS

Под заказ

от12 719,19 ₽

/Почему стоит заказать у нас?

Надежность, проверенная временем

Инвестируйте в стабильную работу вашего бизнеса с нашими проверенными решениями.

Hover Card Image
Экспертная консультация

Подбор оборудования под ваши задачи и бюджет

Hover Card Image
Всё в одном месте

Огромный выбор серверов, комплектующих и сетевого оборудования в наличии на складе

Hover Card Image
Технологии будущего уже сегодня

Самые современные устройства и комплектующие для максимальной производительности и масштабируемости

Hover Card Image

/Популярные товары в этой категории

/Отзывы

0.0

0 отзывов

Отзывов пока нет. Будьте первым — поделитесь впечатлением о товаре.

Callback block background

Оставьте заявку и наши менеджеры свяжутся с вами

Form Background

Я согласен на обработку персональных данных

Остались вопросы?

Свяжитесь с нами по почте

zakaz@astrocomputers.ru
Form Background

Я согласен на обработку персональных данных